Ebling Snow Plows 2018 12ft Tractor Backblade
Call for Price
Heavy duty back blade designed for 4wd tractors with a minimum of 40hp and a Category I three-point hitch.
One piece all welded construction on moldboard and wings.
Moldboard also accepts a 4ft wing to make the blade 16ft overall.
Moldboard cutting edge is raked forward for improved scraping action.
3/4" x 6" Carbon steel cutting edge on main moldboard and 1-1/2"x 6" Polyurethane cutting edge on wings is standard.
Breakaway shear bolt on each wing reduces the possibility for cylinder and wing damage when an obstruction is hit.
Controls utilize the onboard 3 point hitch and the auxiliary hydraulics of the tractor.
2 sets of hydraulic remotes are required on the tractor for independent wing control.
Wings rotate 90 degrees total and may be started or stopped in any position.
Blade height: 24"
Moldboard size: 96"
Approximate wing size: 2'
Approximate inside width closed 8'
Blade width fully open: 12
Approximate blade weight: 725 lbs
Powder Coat finish